Wireless System Features And Standards Support - D-Link Unified Access System DWS-3000 Series User Manual

D-Link Unified Access System User Manual
6. To enable encryption, use the Encryption Protocol pull-down menu to select DES for the
encryption scheme. Then, enter an encryption code of eight or more alphanumeric
characters in the Encryption Key field.
7. Click Submit.
To access configuration information for SNMPv1 or SNMPv2, click LAN > Administration
> SNMP Manager and click the page that contains the information to configure.

Wireless System Features and Standards Support

In addition to core switching features, the D-Link WLAN Controller Switch supports the
following features and standards:
• IP Tunneling
• Spanning Tree
• Auto detection and configuration of APs
• Automatic Peer-Switch Discovery
• Automatic or Manual RF Channel Assignment
• Automatic or Manual AP Power Adjustment
• AP Authentication
• Client Authentication
• Load Balancing
• RF Scan and AP Sentry Mode
• Broadcast/Multicast Rate Limiting
• Dual Radio Support
• Multiple Mode Support for Radios:
-
-
-
-
-
-
-
• IEEE 802.11h (TPC & DFS)
• Security Standard Support:
-
-
-
-
-
-
-
-
-
• MAC Authentication
• Multiple BSSID/VLANs
• Security and Authentication Settings per SSID
• VLAN Support
• IEEE 802.11d (Country Code)
28 © 2001- 2006 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
IEEE 802.11a
IEEE 802.11b
IEEE 802.11g
Atheros Turbo 5 Ghz
Atheros Dynamic Turbo 5Ghz
Atheros Turbo 2.4 Ghz
Atheros Dynamic Turbo 2.4 Ghz
WEP (64, 128)
WEP (152)
TKIP
AES & CCMP
Inhibit / Ignore SSID broadcast
WPA (Personal)
WPA (Enterprise)
WPA2 (Personal) 802.11i
WPA2 (Enterprise) 802.11i