D-Link Unified Access System DWS-3000 Series User Manual page 177

Table 59. AP Default AP Profile Settings
Feature
Radio Settings
Radio (1 and 2)
Radio 1 IEEE 802.11 Mode
Radio 2 IEEE 802.11 Mode
RF Scan Other Channels
RF Scan Interval
RF Scan Duration
Super AG
Extended Range
Automatic Channel
Automatic Power
Initial Power
Load Balancing
Load Utilization
Maximum Clients
RTS Threshold
DTIM Period
Fragmentation Threshold
Beacon Period
Rate Limiting
Rate Limit
Rate Limit Burst
Rate Sets
Supported (Mbps)
Rate Sets (Mbps)
(Basic/Advertised)
D-Link Unified Access System Default Settings
Default
On
802.11b/g
802.11a
NOTE: If the AP operates in a regulatory domain
where 802.11a is not supported, the radio is disabled
and no mode is configured.
Enabled
60 seconds
10 milliseconds
Disabled
Disabled
Enabled
Enabled
100
Disabled
60%
256
2347 bytes
10 beacons
2346 bytes
100 milliseconds
Disabled
50 packets/second
75 packets/second
IEEE 802.1a: 54, 48, 36, 24, 18, 12, 9, 6
IEEE 802.1g: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1
IEEE 802.1b: 11, 5.5, 2, 1
Atheros Turbo 5 GHz: 108, 96, 72, 48, 36, 24, 18, 12
IEEE 802.1a: 24, 12, 6
IEEE 802.1g: 11, 5.5, 2, 1
IEEE 802.1b: 2, 1
Atheros Turbo 5 GHz: 48, 24, 12
Default D-Link Access Point Profile Settings 177