Configuring Qos; Figure 72. Qos Configuration - D-Link Unified Access System DWS-3000 Series User Manual

D-Link Unified Access System User Manual

Configuring QoS

Quality of Service (QoS) provides you with the ability to specify parameters on multiple
queues for increased throughput and better performance of differentiated wireless traffic like
Voice-over-IP (VoIP), other types of audio, video, and streaming media as well as traditional
IP data over the D-Link Unified Access System.
For detailed information about QoS and how it is used in the D-Link Unified Access System,
see Appendix D, "Understanding Quality of Service" on page 203.

Figure 72. QoS Configuration

Configuring Quality of Service (QoS) on the D-Link Unified Access System consists of
setting parameters on existing queues for different types of wireless traffic, and effectively
specifying minimum and maximum wait times (through Contention Windows) for
transmission. The settings described here apply to data transmission behavior on the access
point only, not to that of the client stations.
AP Enhanced Distributed Channel Access (EDCA) Parameters affect traffic flowing from the
access point to the client station. Station Enhanced Distributed Channel Access (EDCA)
Parameters affect traffic flowing from the client station to the access point.
NOTE: QoS is configured per radio interface.
156 © 2001- 2006 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.