Viewing Associated Client Ssid Status; Table 43. Associated Client Neighbor Ap Status - D-Link Unified Access System DWS-3000 Series User Manual

Table 42. Detailed Associated Client Status
Field
Age
Tunnel IP Address
Viewing Associated Client Neighbor AP Status
The Neighbor AP page for the associated client status shows information about access points
that the client detects. The information on this page can help you determine the managed AP
an associated client might use for roaming.
Table 43 describes the information available on the Neighbor AP page for the associated
client status.

Table 43. Associated Client Neighbor AP Status

Field
MAC Address
(Drop-down Menu)
AP MAC Address
Location
Radio
Discovery Reason

Viewing Associated Client SSID Status

Each managed AP can have up to 16 different networks that each have a unique SSID.
Although several wireless clients might be connected to the same physical AP, they might not
Description
Indicates the time in seconds since the switch has received new association
data for this client.
This field is blank for all non-tunneled clients. For a tunneled client, this is
the assigned tunnel IP address.
Description
Shows the MAC address of the client to which the values on the page apply.
To view details about a different associated client, select its MAC address
from the drop-down menu.
The base Ethernet address of the WCS managed AP.
The configured descriptive location for the managed AP
The radio interface and its configured mode that detected this client as a
neighbor.
Indicates one or more discovery methods for the neighbor client. One or
more of the following values may be displayed:
• RF Scan - The client was reported from an RF scan on the radio. Note
that client stations are difficult to detect via RF scan, the other methods
are more common for client neighbor detection.
• Probe Request - The managed AP received a probe request from the
client.
• Associated to Managed AP- This neighbor client is associated to another
managed AP.
• Associated to This AP - The client is associated to this managed AP on
the displayed radio.
• Associated to Peer AP - The client is associated to an AP managed by a
peer switch.
• Ad Hoc Rogue - The client was detected as part of an ad hoc network
with this AP.
7 Monitoring Status and Statistics
Monitoring Associated Client Information 141