Peer switches do not exchange configuration profiles or additional data about their managed
APs. This means that you cannot view any other status or statistics for a managed AP from a
peer switch. However, switches do use shared information for rogue AP detection.
Figure 57. Peer Switch Status
Table 25
describes the fields available on the Peer Switch Status page.
Table 25. Peer Switch Status
Field
IP Address
Vendor ID
Software Version
Protocol Version
Discovery Reason
Age
Monitoring All Access Points
The Monitoring > Access Points > All Access Points page shows summary information
about managed, failed, and rogue access points the switch has discovered or detected.
Figure 58. All Access Points
Description
IP address of the peer wireless switch managed in the peer group.
Vendor of the peer switch software.
The software version for the given peer switch.
Version of WS software on the peer switch.
The discovery method of the given peer switch, which can be one of the
following methods:
•
L2 Poll
•
IP Poll
Time since last communication with the switch in Hours, Minutes, and
Seconds.
7 Monitoring Status and Statistics
Monitoring All Access Points
121