D-Link Unified Access System DWS-3000 Series User Manual page 126

D-Link Unified Access System User Manual
Table 28. Detailed Managed Access Point Status
Field
Configuration
Status
Protocol Version
Software Version
Last Failing
Configuration
Element
Configuration
Failure Error
Message
Code Download
Status
Associated Clients
Authenticated
Clients
System Uptime
Age
Viewing Managed Access Point Radio Summary Information
You can view general information about each operational radio on all APs managed by the
switch. The Managed Access Point Radio Summary page shows the channel, transmit power,
and number of associated wireless clients for all managed APs. For more information about a
specific radio on an AP, click the radio.
126 © 2001- 2006 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
Description
This status indicates if the AP is configured successfully with the assigned
profile. The status is one of the following:
• Not Configured - The profile has not been sent to the AP yet, the AP
may be discovered but not yet authenticated.
• In Progress - The switch is currently sending the AP profile
configuration packet to the AP.
• Complete Success - The entire profile has been sent to the AP and there
were no configuration errors.
• Partial Success - The entire profile has been sent to the AP and there
were configuration errors, but the AP is operational.
• Failure - The profile has been sent to the AP and there were
configuration errors, the AP is not operational.
Indicates the protocol version supported by the software on the AP, this is
learned from the AP during discovery.
Indicates the version of software on the AP, this is learned from the AP
during discovery.
If the configuration status indicates a partial success or complete failure, this
field indicates the last element that failed during configuration. This field is
only visible if there is a failed element.
If the configuration status indicates a partial success or complete failure, this
field contains an ASCII string filled in by the AP containing the error
message for the last failing configuration element.
This indicates the current status of a code download request for this AP. The
possible values include the following:
• Not Started - A code download has not been requested for the AP.
• Requested - A code download has been requested for the AP, the switch
has not processed the request.
• In Progress - The switch is processing a code download request for the
AP.
• Success - The AP has successfully downloaded the new software image.
• Failure - The AP failed to download the new software image.
Total number of clients currently associated to the AP. This is the sum of all
associated clients for all the VAPs enabled on the AP. Association is a
transitional state.
Total number of clients currently authenticated to the AP. This is the sum of
all authenticated clients for all the VAPs enabled on the AP.
Time in seconds since last power-on reset of the managed AP.
Time since last communication between the WDS and the AP.