D-Link Unified Access System Default
Settings
This chapter identifies the default values for the D-Link WLAN Controller Switch and the
default AP Profile setting that the switch assigns to the AP after it is discovered and
authenticated (when the AP uses the default profile).
Default D-Link WLAN Controller Switch Settings
Table 58
Table 58. Switch Defaults
System Information
Network Information
shows the default settings for the D-Link WLAN Controller Switch
Feature
User Name
Password
DHCP Client
Network Configuration Protocol
IP Address
Subnet Mask
802.1Q
Management VLAN ID
Untagged VLAN ID
Spanning Tree Protocol
Default
admin
None
Disabled
None
10.90.90.90
255.0.0.0
Enabled
1
1
Enabled
Default D-Link WLAN Controller Switch Settings
A
175