Figure 3-71 Text-In Device Settings Screen - Honeywell HRXD9 User Manual

Configuration
Highlight the box beside Port, and press
USB-Serial (1~8).
Highlight Setup..., and press
settings when configuring the RS232, RS485 or USB-Serial ports.
Highlight the box beside Text-In Product, and press
list.
Highlight the box beside Transaction Start, and press
enter the Transaction Start string. Refer to the device manufacturer's documentation for
the text string that the device first sends when a transaction starts.
If you want the DVR to react to any character sent from the text input device, you will
want to turn On Any Character. Highlight Any Character, and press
between On and Off.
Rev 1.00
Figure 3-71 Text-In Device Settings Screen
Note If you have set the Port as None, you will not be able to make
any changes to the screen.
Note When using the USB to serial text-in device, do NOT remove the
USB cable from the port while the system is running.
Note The following description is for a Generic Text Device. The
screen changes for different types of text input devices, and
there will be different parameter boxes for you to enter
information.
. Select from None, RS232, RS485 and
. Use the ATM or POS manufacturer's recommended
71
. Select your device from the
. Use the virtual keyboard to
to toggle
Document 900.0856
12/06