Table of Contents
Advertisement
Configuration
3.
Authority Level
Shutdown
Upgrade
System Time
Change
Data Clear
Setup
Color Control
PTZ Control
Alarm-Out Control
Covert Camera View
System Check
48
Figure 3-18
New Group Setup Screen
Assign authority levels to the group in the New Group setup screen.
To change all authority levels of the group, highlight the Authority field and press
to toggle between On and Off.
To change the authority level of a single User, highlight the individual authority
level boxes and press
The authority levels that can be turned On and Off are shown in
Table 3-4
New Group Authority Level Assignments
Action
The user can shut the system down on a local system.
The user can upgrade the software on a local system or a PC running
RASplus.
The user can change the system date and time on a local system or a PC
running RASplus.
The user can clear all video data or format disks on a local system or a PC
running RASplus.
The user without Setup authority cannot establish any system settings
excluding system shutdown and logout on a local system or a PC running
RASplus.
The user can control brightness, contrast, hue, and saturation for cameras
on a local system or a PC running RASplus.
The user can control the PTZ camera on a local system or a PC running
RASplus.
The user can reset the DVR outputs including the internal buzzer that plays
during an alarm by pressing the ALARM button on a local system or
alarm-out control button on a PC running RASplus.
The user can view video from cameras set to Covert while in the Live
Monitoring or Search mode on a local system or a PC running RASplus.
The user can view the remote system status or check the remote system
status as a batch process on a PC running RASplus.
to toggle between On and Off.
Table
3-4:
Advertisement
Table of Contents
