Swap Between Calls Before Youcomplete A Conference; View And Remove Conference Participants; Scheduled Conference Calls (Meet Me) - Cisco 8800 Series User Manual

Calls
Procedure
Step 1
From an active call, press Conference
Step 2 Add the other person to the call by doing one of the following:
• Press Active calls and select a held call.
• Enter the phone number and press Call.
Step 3
Press Conference.

Swap Between Calls Before YouComplete a Conference

You can talk to a person before you add them to a conference. You can also swap between the conference
call and the call with the other person.
Procedure
Step 1 Call a new conference participant, but do not add the participant to the conference.
Wait until the call is connected.
Step 2 Press Swap to toggle between the participant and the conference.

View and Remove Conference Participants

If you create a conference, you can view the details of the last 16 participants who join the conference. You
can also remove participants.
Procedure
Step 1 While you are in a conference, press Show Details to view a list of participants.
Step 2 (Optional) Highlight a participant and press Remove to drop the participant from the conference.

Scheduled Conference Calls (Meet Me)

You can host or join a conference call at a scheduled time.
The conference call does not start until the host dials in, and it ends when all participants hang up. The
conference does not automatically end when the host hangs up.
Swap Between Calls Before YouComplete a Conference
.
Cisco IP Phone 8800 Series User Guide
41