Conference Calls And Meetings; Add Another Person To A Call; Swap Between Calls Before You Complete A Conference; View And Remove Conference Participants - Cisco 8841 User Manual

Conference Calls and Meetings

You can talk with several people in a single call. You can dial another person and add them to the
call. If you have multiple phone lines, you can join two calls across two lines.
When you add more than one person to a conference call, wait a few seconds between adding
participants.
As the conference host, you can remove individual participants from the conference. The
conference ends when all participants hang up.

Add Another Person to a Call

When you add more than one person to a call, wait a few seconds between adding participants.
Procedure
Step 1 From an active call, press Conference
Step 2 Add the other person to the call by doing one of the following:
Press Active calls and select a held call.
Enter the phone number and press Call.
Step 3 Press Conference.
Swap Between Calls Before You Complete a
Conference
You can talk to a person before you add them to a conference. You can also swap between the
conference call and the call with the other person.
Procedure
Step 1 Call a new conference participant, but do not add the participant to the conference.
Wait until the call is connected.
Step 2 Press Swap to toggle between the participant and the conference.

View and Remove Conference Participants

If you create a conference, you can view the details of the last 16 participants who join the
conference. You can also remove participants.
Procedure
Horizon | Cisco IP Phone 8841/8851 and 8861 User Guide
© Gamma 2016. All rights reserved. Confidential.
.
Page 19 of 29