Intercom Calls
Host a Meet-Me Conference
Before You Begin
Get a meet-me phone number from your administrator, and distribute the number to the conference participants.
Procedure
Step 1 Lift the handset to get a dial tone and press Meet Me.
Step 2 Dial the meet-me phone number.
Join a Meet-Me Conference
You cannot join a meet-me conference until the conference hosts dials in. If you hear a busy tone, the host
has not dialed into the conference. Hang up and try your call again.
Procedure
Dial the meet-me phone number that the conference host provides.
Intercom Calls
You can use an intercom line to place and receive one-way calls.
When you place an intercom call, the recipient's phone answers the call automatically with mute activated
(whisper mode).Your message is broadcast through the recipient's speakerphone, headset, or handset, if one
of these devices is active.
After receiving the intercom call, the recipient can start two-way audio (connected mode) to allow for further
conversation.
Make an Intercom Call
When you place an intercom call, your phone enters whisper mode until the recipient accepts the intercom
call. In whisper mode, the other person can hear you, but you can't hear them. If you are on an active call, that
call is placed on hold.
Cisco IP Phone 8800 Series User Guide
42
Calls