Swap Between Calls Before Completing A Conference; View Conference Participants; Remove Conference Participants; Meet Me Conference - Cisco 8811 User Manual

Advanced Calling Features

Swap Between Calls Before Completing a Conference

You can consult privately with the conference and another person, before adding the person into the conference.
Procedure
Step 1 Call a new conference participant, but do not add the participant to the conference.
You must wait until the call is connected.
Step 2 Press Swap to toggle between the participant and the conference.

View Conference Participants

You can view the details of the last 16 participants who joined the conference.
Procedure
While in a conference, press Show Details to view a list of participants.
Note

Remove Conference Participants

Procedure
Step 1
While in a conference, press Show Details.
Step 2 Highlight the participant that you want to remove, then press Remove.

Meet Me Conference

Meet Me allows you to call a predetermined number at a scheduled time to host or join a Meet Me conference.
The Meet Me conference begins when the host connects. Participants who call the conference before the host
has joined hear a busy tone and must dial again.
The conference ends when all participants hang up; the conference does not automatically end when the host
disconnects.
When you place a call to another party and the person that you called creates a conference with a
third phone, the Show Details softkey displays only for the person who created the conference.
Swap Between Calls Before Completing a Conference
Cisco IP Phone 8800 Series User Guide
69