Connect To Expressway; Activate Your Phone Automatically With A Qr Code - Cisco 8800 Series User Manual

Connectto the Network
Procedure
Step 1
Press Applications
Step 2
Select Admin settings.
Step 3 Select one of the following menu items:
• All phones connected to the Ethernet: Ethernet setup
• Cisco IP Phone 8861 and 8865 users that use Wi-Fi: Wi-Fi client setup
Step 4 Select IPv4 Setup.
Step 5 Navigate to Alternate TFTP and choose On.
Step 6 Select TFTP server 1.
Step 7
Enter your TFTP server address in the TFTP server 1 field.
Step 8 Press Apply.
Step 9 Press Continue.
Step 10 Press Exit.

Connect to Expressway

You can use Mobile and Remote Access Through Expressway to connect into your corporate network when
you are working away from your office. Because your phone does not have a TFTP address configured, the
phone displays a Welcome screen to begin the sign-in process.
Before You Begin
If you have been using your phone at the office or with a VPN, reset your service mode before you connect
to Expressway.
If you need to connect to Mobile and Remote Access Through Expressway on-premise, restart your phone
and press Select when prompted.
Procedure
Step 1 Enter your activation code or service domain on the Welcome screen.
Step 2
Enter your username and password.
Step 3 Press Submit.

Activate Your Phone Automatically with a QR Code

If your phone has a camera, you can scan a QR code to activate the phone. If you inadvertently press Enter
manually, press Back
Cisco IP Phone 8800 Series User Guide
8
.
to return to the QR code screen.
Your Phone