Stop Your Video; Toggle Between Phone And Video Display; Adjust The Picture-In-Picture Position - Cisco 8800 Series User Manual

Calls
Procedure
Step 1 Turn the ring around the camera clockwise to open the shutter.
Step 2 (Optional) Press Self-view and move the camera up and down to improve the perspective.
Make your call.
Step 3

Stop Your Video

When you are on a video call, you can stop the camera from sending video. The ring on the outside of the
camera controls the shutter. When you close the shutter, the person you're talking to won't see youanymore,
but they'll still be able to hear you.
If you close the shutter, you will continue receiving video from the other party on the call.
If both people on a call close their camera shutters, the call becomes an audio call.
Procedure
Step 1 Turn the shutter ring counterclockwise to close the camera shutter and stop sharing your video.
Step 2 Turn the shutter ring clockwise to open the video camera shutter and share your video again.

Toggle Between Phone and Video Display

If you need to see your phone's desktop while you're on a video call, you can easily switch between the video
and the desktop. When you hide the video, it blurs and moves to the background.
Procedure
Step 1 Press Hide video to hide the video.
Step 2 Press Show video to show the video.

Adjust the Picture-In-Picture Position

When you are on a video call, you can view your incoming and your outgoing video at the same time, which
is known as Picture-in-Picture (PiP). Typically, the incoming video displays on the full screen and a small
inset screen shows the video from your camera.
When PiP is on, you can move the inset picture to a different quadrant of the screen. You can also change the
view so that your camera video displays on the full screen and the inset displays the incoming video.
Stop Your Video
Cisco IP Phone 8800 Series User Guide
35