Ii-1-3 Mpoa /Static Or Dynamic Ip - Draytek Vigor 160 Series User Manual

Schedule
After finishing all the settings here, please click OK to activate them.
I I - 1 - 3 M
I I - 1 - 3 M
MPoA is a specification that enables ATM services to be integrated with existing LANs, which
use either Ethernet, token-ring or TCP/IP protocols. The goal of MPoA is to allow different
LANs to send packets to each other via an ATM backbone.
For static IP mode, you usually receive a fixed public IP address or a public subnet, namely
multiple public IP addresses from your DSL or Cable ISP service providers. In most cases, a
Cable service provider will offer a fixed public IP, while a DSL service provider will offer a
public subnet. If you have a public subnet, you could assign an IP address or many IP address
to the WAN interface.
To use MPoA /Static or dynamic IP as the accessing protocol of the Internet, select MPoA
mode. The following web page will appear.
Vigor160 Series User's Guide
Fixed IP – Click Yes to use this function and type in a fixed IP
address in the box of Fixed IP Address.
Default MAC Address – You can use Default MAC Address or
specify another MAC address by typing on the boxes of MAC
Address for the modem.
Specify a MAC Address – Type the MAC address for the
modem manually.
You can type in four sets of time schedule for your request.
All the schedules can be set previously in Application >>
Schedule web page and you can use the number that you
have set in that web page.
P o A / S t a t i c o r d y
P o A / S t a t i c o r d y
n a m i c I P
n a m i c I P
27