Mpoa /Static Or Dynamic Ip - Draytek Vigor130 User Manual

Vdsl2/adsl2/2+ modem
Hide thumbs Also See for Vigor130:
Table of Contents

Advertisement

IP Address From ISP
After finishing all the settings here, please click OK to activate them.
3
.
1
.
4
M
P
o
A
/
S
3
.
1
.
4
M
P
o
A
/
S
MPoA is a specification that enables ATM services to be integrated with existing LANs,
which use either Ethernet, token-ring or TCP/IP protocols. The goal of MPoA is to allow
different LANs to send packets to each other via an ATM backbone.
For static IP mode, you usually receive a fixed public IP address or a public subnet, namely
multiple public IP addresses from your DSL or Cable ISP service providers. In most cases, a
Vigor130 Series User's Guide
is active only when the Active on demand option for Active
Mode is selected in WAN>> General Setup page.
Usually ISP dynamically assigns IP address to you each time
you connect to it and request. In some case, your ISP provides
service to always assign you the same IP address whenever
you request. In this case, you can fill in this IP address in the
Fixed IP field. Please contact your ISP before you want to use
this function.
WAN IP Alias - If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use
WAN IP Alias. You can set up to 8 public IP addresses other
than the current one you are using. Notice that this setting is
available for WAN1 only. Type the additional WAN IP
address and check the Enable box. Then click OK to exit the
dialog.
Fixed IP – Click Yes to use this function and type in a fixed IP
address in the box of Fixed IP Address.
Default MAC Address
Address or specify another MAC address by typing on the
boxes of MAC Address for the modem.
Specify a MAC Address – Type the MAC address for the
modem manually.
Index (1-15) in Schedule Setup - You can type in four sets of
time schedule for your request. All the schedules can be set
previously in Applications >> Schedule web page and you
can use the number that you have set in that web page.
t
a
t
i
c
o
r
d
y
n
a
m
i
c
t
a
t
i
c
o
r
d
y
n
a
m
i
c
– You can use Default MAC
I
P
I
P
28

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents