Draytek Vigor 160 Series User Manual page 266

Parameter
server
[<command>
<parameter>|...]
-a
-b
-n <name>
-c<parameter>
-e<parameter>
-t <time>
-y <time>
-u <time>
-o <time>
-i<pool_min_addr>
-x<pool_max_addr>
-r <1/0>
-d<addr>
-D<addr>
-m<1/0>
-q
-z<1/0>
pdadd
<suffix><prefix_len><client
linklocal><client DUID>
pddel <PD index>
-A <parameter>
- M <parameter>
-S <parameter>
-K <parameter>
E x a m p l
E x a m p
> ip6 dhcp server -d FF02::1
> ip6 dhcp server -i ff02::1
> ip6 dhcp server -x ff02::3
> ip6 dhcp server -a
% Interface LAN has following DHCPv6 server settings:
256
Description
It means the dhcp server settings.
The available commands with parameters are listed below.
[...] means that you can type in several commands in one line.
It means to show current DHCPv6 status.
It means to show current DHCPv6 IP Assignment Table.
It means to set a profile name.
It means to send rapid commit to server.
1: Enable
0: Disable
It means to enable or disable the DHCPv6 server.
1: Enable
0: Disable
It means to set prefer lifetime.
It means to set valid lifetime.
It means to set T1 time.
It means to set T2 time.
It means to set the start IPv6 address of the address pool.
It means to set the end IPv6 address of the address pool.
It means to enable (1) or disable (0) auto_range.
It means to set the first DNS IPv6 address.
It means to set the second DNS IPv6 address.
It means to enable(1) or disable (0) the server DUID set by Link
Layter and Time.
It means to set DNS domain search list.
It means enable (1) or disable (0) the DHCP PD.
It means to add PD node.
It means to delete PD node.
It means to set authentication protocol.
0: Undefine
2: delayed protocol
3: Reconfigure key
It means to set realm value (max: 31 characters) in delayed
protocol.
It means to set shared secret (max: 31 characters) in delayed
protocol.
It means to set key ID (1~65535) in delayed protocol.
e
l e
Vigo160 Series User's Guide