Draytek Vigor 160 Series User Manual page 159

TLS/SSL Encryption Setup
Device Management
After finished the above settings, click OK to save the configuration.
F o r I P v 6
F o r I P v 6
Available settings are explained as follows:
Item
Management Access
Control
Vigor160 Series User's Guide
SNMP function. Please type in IPv4 address to specify certain
host.
Trap Community - Set trap community by typing a proper
name. The default setting is public.
Notification Host IP - Set the IPv4 address of the host that
will receive the trap community.
Trap Timeout - The default setting is 10 seconds.
Enable SSL 3.0 and / or TLS 1.0/1.1/1.2 – Check the box to
enable the function of SSL 3.0 and/or TLS 1.0/1.1/1.2 if
required.
Due to security consideration, the built-in HTTPS and SSL
VPN server of the router had upgraded to TLS1.x protocol. If
you are using old browser(eg. IE6.0) or old SmartVPN Client,
you may still need to enable SSL 3.0 to make sure you can
connect, however, it's not recommended.
Check the box to enable the device management function for
Vigor device.
Respond to external device – If it is enabled, Vigor device
will be regarded as slave device. When the external device
(master device) sends request packet to Vigor device, Vigor
device would send back information to respond the request
coming from the external device which is able to manage
Vigor device.
Broadcast DSL status to LAN – Clients in LAN can get current
DSL connection status if such function is enabled.
Description
Allow management from the Internet - Enable the checkbox
to allow system administrators to login from the Internet.
149