Ii-1-4-8 Details Page For Ipv6 - 6Rd - Draytek Vigor 160 Series User Manual

I I - 1 - 4 - 8 D
I I - 1 - 4 - 8 D
This type allows you to setup 6rd for WAN interface.
Available settings are explained as follows:
Item
6rd Mode
IPv4 Border Relay
IPv4 Mask Length
6rd Prefix
6rd Prefix Length
WAN Connection
Detection
After finished the above settings, click OK to save the settings.
Vigor160 Series User's Guide
e t a i l s P a g e f o r I P v 6
e t a i l s P a g e f o r I P v 6
Description
Auto 6rd – Retrieve 6rd prefix automatically from 6rd service
provider. The IPv4 WAN must be set as "DHCP".
Static 6rd - Set 6rd options manually.
Type the IPv4 addresses of the 6rd Border Relay for a given
6rd domain.
Type a number of high-order bits that are identical across all
CE IPv4 addresses within a given 6rd domain.
It may be any value between 0 and 32.
Type the 6rd IPv6 address.
Type the IPv6 prefix length for the 6rd IPv6 prefix in number
of bits.
Such function allows you to verify whether network
connection is alive or not through NS Detect or Ping Detect.
Mode – Choose Always On, Ping Detect or NS Detect for the
system to execute for WAN detection. With NS Detect mode,
the system will check if network connection is established or
not, like IPv4 ARP Detect. Always On means no detection
will be executed. The network connection will be on always.


6 r d
6 r d
– –
Ping IP/Hostname – If you choose Ping Detect as
detection mode, you have to type IP address in this field
for pinging.
TTL (Time to Live) –If you choose Ping Detect as
detection mode, you have to type TTL value.
39