Ii-1-4-4 Details Page For Ipv6 - Aiccu - Draytek Vigor 160 Series User Manual

I I - 1 - 4 - 4 D
I I - 1 - 4 - 4 D
Available settings are explained as follows:
Item
Always On
Username
Password
Tunnel Broker
Tunnel ID
Subnet Prefix
WAN Connection
Detection
34
e t a i l s P a g e f o r I P v 6
e t a i l s P a g e f o r I P v 6
Description
Check this box to keep the network connection always.
Type the name obtained from the broker. Please apply new
account at http://www.sixxs.net/. It is suggested for you to
apply another username and password.
The maximum length of the name you can set is 19
characters.
Type the password assigned with the user name.
The maximum length of the password you can set is 19
characters.
It means a server of AICCU. The server can provide IPv6
tunnels to sites or end users over IPv4.
Type the address for the tunnel broker IP, FQDN or an
optional port number.
One user account may have several tunnels. And, each
tunnel shall have one specified tunnel ID (e.g., T115394).
Type the ID offered by Tunnel Broker.
Type the subnet prefix address obtained from service
provider.
The maximum length of the prefix you can set is 128
characters.
Such function allows you to verify whether network
connection is alive or not through NS Detect or Ping Detect.
Mode – Choose Always On, Ping Detect or NS Detect for the
system to execute for WAN detection. With NS Detect mode,
the system will check if network connection is established or
not, like IPv4 ARP Detect. Always On means no detection
A I C C U
A I C C U
– –
Vigor160 Series User's Guide