Draytek Vigor 160 Series User Manual page 346

Parameter
[<command><parameter>|...
]
-p 0/1
-u 0/1
-t 0/1
E x a m p l
E x a m p
> sys sip_alg -p 65535
Current listening port: 65535
T e l n e t C o m m
T e l n e t C o m m
This command can turn on/off SIP ALG (Application Layer Gateway) for RTSP
S y n t a x
S y n t a x
sys rtsp_alg <command> <parameter>
S y n t a x
S y n t a x
Parameter
[<command><parameter>|...
]
-e 0/1
-p 0/1
-u 0/1
-t 0/1
-v
E x a m p l
E x a m p
> sys rtsp_alg -e 1
Auto enable ALG Master Switch
Enable RTSP ALG
> sys rtsp_alg -p 85
Current listening RTSP Port: 85
> sys rtsp_alg ?
Usage: sys rtsp_alg <command> <parameter>
-e: enable RTSP ALG (0:disable, 1:enable)
-p: set your listening port for RTSP ALG
-u: enable listen along UDP path (0:disable, 1:enable)
-t: enable listen along TCP path (0:disable, 1:enable)
-v: show rtp and rtcp portmap information of RTSP ALG
Current RTSP ALG status
-ALG Master Switch: Enabled
-RTSP ALG: Enabled
-Listen along UDP path: Yes
-Listen along TCP path: Yes
-Listening Port: 85
336
Description
The available commands with parameters are listed below.
[...] means that you can type in several commands in one line.
Set the listening port (1~65535) for SIP ALG.
Enable (1) or disable (0) the listening along UDP path.
Enable (1) or disable (0) the listening along TCP path.
e
l e
a n d : s y s r t s p _ a l g
a n d : s y s r t s p _ a l g
D e s c r i p t i o n
D e s c r i p t i o n
Description
The available commands with parameters are listed below.
[...] means that you can type in several commands in one line.
Enable (1) or disable (0) the function of RTSP ALG.
Set the listening port (1~65535) for RTSP ALG.
Enable (1) or disable (0) the listening along UDP path.
Enable (1) or disable (0) the listening along TCP path.
Display RTP and RTCP portmap information of RTSP ALG.
e
l e
Vigo160 Series User's Guide