Draytek Vigor 160 Series User Manual page 242

-S <isp name>
-P <on/off>
-u <username>
-p <password>
-a n
-t n
-i <ip address>
-w <ip address>
-n <netmask>
-g <gateway>
-s <server ip>
-A <idx>
-B <mode>
-V
-C <sim pin code>
-O <init string>
-T <init string2>
-D <dial string>
-v <service name>
-m <ppp username>
-o <ppp password>
-e n
-q n
232
n=2: Dynamic IP
n=3: Static IP
n=4: PPTP with Dynamic IP,
n=5: PPTP with Static IP,
n=6: L2TP with Dynamic IP
n=7: L2TP with Static IP
n=A: 3G/4G USB Modem(PPP mode)
n=B: 3G/4G USB Modem(DHCP mode
It means to set ISP Name (max. 23 characters).
It means to enable PPPoE Service.
It means to set username (max. 49 characters) for Internet
accessing.
It means to set password (max. 49 characters) for Internet
accessing.
It means to set PPP Authentication Type and n means different
types (represented by 0-1).
n=0: PAP/CHAP (this is default setting)
n=1: PAP Only
It means to set connection duration and n means different
conditions.
n=-1: Always-on
n=1 ~ 999: Idle time for offline (default 180 seconds)
It means that PPPoE server will assign an IP address specified here
for CPE (PPPoE client).
If you type 0.0.0.0 as the <ip address>, ISP will assign suitable IP
address for you. However, if you type an IP address here, the router
will use that one as a fixed IP.
It means to assign WAN IP address for such connection. Please type
an IP address here for WAN port.
It means to assign netmask for WAN connection. You have to type
255.255.255.xxx (x is changeable) as the netmask for WAN port.
It means to assign gateway IP for such WAN connection.
Set PPTP/L2TP Server IP.
<server ip>= ppp.qqq.rrr.sss: PPTP/L2TP server IP
Set to Always On mode, and <idx> as backup WAN#.
Set to Backup mode;
<mode> 0: When any WAN disconnect; 1: When all WAN disconnect.
It means to view Internet Access profile.
Set SIM PIN code (max. 15 characters) for USB PPP mode.
Set Modem Initial String (max. 47 characters) for USB PPP mode.
Set Modem Initial String2 (max. 47 characters) for USB PPP mode.
Set Modem Dial String (max. 31 characters) for USB PPP mode.
Set Service Name (max. 23 characters) for USB PPP mode.
Set PPP Username (max. 63 characters) for USB PPP mode.
Set PPP Password (max. 62 characters) for USB PPP mode.
Set PPP Authentication Type for USB PPP mode.
n= 0: PAP/CHAP (default),
1: PAP Only
Set the first schedule for USB PPP mode.
Vigo160 Series User's Guide