Draytek Vigor 160 Series User Manual page 350

-m <1/0>
-f <1/0>
-v <1/0>
-e <1/0>
-c <1/0>
-w <1/0>
-r <1/0>
-t <1/0>
-o <port number>
-p
E x a m p l
E x a m p
> sys syslog -a 1 -s 1 -i 192.168.1.25 -d 514
> sys syslog –p
> Updating server IP address..
T e l n e t C o m m
T e l n e t C o m m
This command is used to configure settings for mail alert function.
S y n t a x
S y n t a x
sys mailalert [<command><parameter>|...]
S y n t a x
S y n t a x
Parameter
[<command><parameter>|...
]
-e <0/1>
-i <SMTP Server IP>
-o <SMTP Server Port>
-a <Mail Address>
-r <Mail Address>
-s <0/1>
-h <0/1>
-u <Username>
-p <Password>
-l <type> <0 /1 >
-f
-v
-R <0/1>
340
Enable (1) or disable (0) Mail Syslog.
Enable (1) or disable (0) Filewall Log.
Enable (1) or disable (0) VPN Log.
Enable (1) or disable (0) User Access Log.
Enable (1) or disable (0) Call Log.
Enable (1) or disable (0) WAN Log.
Enable (1) or disable (0) Router/DSL Information.
Enable (1) or disable (0) AlertLog Setup.
Define the port number (1 ~ 65535) for AlertLog.
Update the IP address of the server.
e
l e
a n d : s y s m a i l a l e r
a n d : s y s m a i l a l e r
D e s c r i p t i o n
D e s c r i p t i o n
Description
The available commands with parameters are listed below.
[...] means that you can type in several commands in one line.
Enable (1) or disable (0) the mail alert function.
Set the SMTP sever IP address.
Set the port number (1~65535) for SMTP server.
Set Alert Mail Reciver E-maiil Address.
Set Mail Return E-mail Address.
Enable/Disable Use SSL.
Enable/Disable SMTP Authentication.
Set Username for SMTP Authentication.
Set Password for SMTP Authentication.
"0 <0/1>" : Set Enable/Disable Mail Alert of the DoS Attack.
"1 <0/1>" : Set Enable/Disable Mail Alert of the APPE.
"2 <0/1>" : Set Enable/Disable Mail Alert of the VPN Log.
"3 <0/1>" : Set Enable/Disable Mail Alert of the APPE Signature.
"6 <0/1>" : Set Enable/Disable Mail Alert of the Reboot Debug Log.
Reset Mail Alert Setting to factory default.
Show Current Mail Alert Setting.
Set Mail Alert Reboot Debug Log Mode.
0: Limited Mode, 1: Unlimited Mode.
t
t
Vigo160 Series User's Guide