Ii-1-4-5 Details Page For Ipv6 - Dhcpv6 Client - Draytek Vigor 160 Series User Manual

After finished the above settings, click OK to save the settings.
I I - 1 - 4 - 5 D
I I - 1 - 4 - 5 D
DHCPv6 client mode would use DHCPv6 protocol to obtain IPv6 address from server.
Available settings are explained as follows:
Item
DHCPv6 Client
Configuration
WAN Connection
Detection
Bridge Mode
After finished the above settings, click OK to save the settings.
Vigor160 Series User's Guide
will be executed. The network connection will be on always.


e t a i l s P a g e f o r I P v 6
e t a i l s P a g e f o r I P v 6
Description
IAID - Type a number as IAID.
Such function allows you to verify whether network
connection is alive or not through NS Detect or Ping Detect.
Mode – Choose Always On, Ping Detect or NS Detect for
the system to execute for WAN detection. With NS Detect
mode, the system will check if network connection is
established or not, like IPv4 ARP Detect. Always On means
no detection will be executed. The network connection will
be on always.


Enable Bridge Mode - If the function is enabled, the router
will work as a bridge modem.
Ping IP/Hostname – If you choose Ping Detect as
detection mode, you have to type IP address in this field
for pinging.
TTL (Time to Live) –If you choose Ping Detect as
detection mode, you have to type TTL value.
D H C P v 6 C l i e n t
D H C P v 6 C l i e n t
–
–
Ping IP/Hostname – If you choose Ping Detect as
detection mode, you have to type IP address in this field
for pinging.
TTL (Time to Live) –If you choose Ping Detect as
detection mode, you have to type TTL value.
35