Draytek Vigor 160 Series User Manual page 300

-s CHK [START_P] [END_P]
-d CHK [START_P] [END_P]
E x a m p l
E x a m p
> object service obj 1 -n limit
> object service obj 1 -p 255
> object service obj 1 -s 1 120 240
> object service obj 1 -d 1 200 220
> object service obj 1 -v
Service Object Profile 1
Name
Protocol:[TCP/UDP]
Source port check action:[!=]
Source port range:[120~240]
Destination port check action:[!=]
Destination port range:[200~220]
T e l n e t C o m m
T e l n e t C o m m
This command is used to integrate several service objects under a service group profile.
S y n t a x
S y n t a x
object service grp setdefault
object service grp INDEX –v
object service grp INDEX –n NAME
object service grp INDEX –a SER_OBJ_INDEX
S y n t a x
S y n t a x
Parameter
setdefault
INDEX
-v
-n NAME
290
0=equal(=), when the starting port and ending port values are the
same, it indicates one port; when the starting port and ending port
values are different, it indicates a range for the port and available
for this service type.
1=not equal(!=), when the starting port and ending port values are
the same, it indicates all the ports except the port defined here;
when the starting port and ending port values are different, it
indicates that all the ports except the range defined here are
available for this service type.
2=larger(>), the port number greater than this value is available..
3=less(<), the port number less than this value is available for this
profile.
It means to set souce port check and configure port range (1~65565)
for TCP/UDP.
END_P, type a port number to indicate source port.
Example: object service obj 3 -s 0 100 200
It means to set destination port check and configure port range
(1~65565) for TCP/UDP.
END_P, type a port number to indicate destination port.
Example: object service obj 3 -d 1 100 200
e
l e
:[limit]
a n d : o b j e c t s e r v i
a n d : o b j e c t s e r v i
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to return to default settings for all profiles.
It means the index number of the specified group profile.
It means to view the information of the specified group profile.
Example: object service grp 1 –v
It means to define a name for the service group.
c e g r p
c e g r p
Vigo160 Series User's Guide