Table of Contents
Advertisement
After finishing all the settings here, please click OK to activate them.
3
.
1
.
4
M
P
o
A
/
S
3
.
1
.
4
M
P
o
A
/
S
MPoA is a specification that enables ATM services to be integrated with existing LANs,
which use either Ethernet, token-ring or TCP/IP protocols. The goal of MPoA is to allow
different LANs to send packets to each other via an ATM backbone.
For static IP mode, you usually receive a fixed public IP address or a public subnet, namely
multiple public IP addresses from your DSL or Cable ISP service providers. In most cases, a
Cable service provider will offer a fixed public IP, while a DSL service provider will offer a
public subnet. If you have a public subnet, you could assign an IP address or many IP
address to the WAN interface.
To use MPoA /Static or dynamic IP as the accessing protocol of the Internet, select MPoA
mode. The following web page will appear.
Vigor130 Series User's Guide
Fixed IP – Click Yes to use this function and type in a fixed IP
address in the box of Fixed IP Address.
Default MAC Address
Address or specify another MAC address by typing on the
boxes of MAC Address for the modem.
Specify a MAC Address – Type the MAC address for the
modem manually.
Index (1-15) in Schedule Setup - You can type in four sets of
time schedule for your request. All the schedules can be set
previously in Applications >> Schedule web page and you
can use the number that you have set in that web page.
t
a
t
i
c
o
r
d
y
n
a
m
i
c
t
a
t
i
c
o
r
d
y
n
a
m
i
c
I
P
I
P
32
– You can use Default MAC
Advertisement
Table of Contents
