Draytek Vigor 160 Series User Manual page 26

Subnet Mask
Default Gateway
Primary DNS
Second DNS
VLAN Tag insertion
(VDSL2)/(ADSL)
Back
Next
Cancel
2. After finished the above settings, simply click Next.
Available settings are explained as follows:
Item
Service Name
(Optional)
User Name
Password
Confirm Password
16
Assign a subnet mask value for the protocol of MPoA/Static
or Dynamic IP.
Assign an IP address to the gateway for the protocol of
MPoA/Static or Dynamic IP.
Assign an IP address to the primary DNS.
Assign an IP address to the secondary DNS.
The settings configured in this field are available for WAN1
and WAN2.
Enable – Enable the function of VLAN with tag.
The router will add specific VLAN number to all packets on
the WAN while sending them out.
Please type the tag value and specify the priority for the
packets sending by WAN1.
Disable – Disable the function of VLAN with tag.
Tag value – Type the value as the VLAN ID number. The range
is from 0 to 4095.
Priority – Type the packet priority number for such VLAN.
The range is from 0 to 7.
Click it to return to previous setting page.
Click it to get into the next setting page.
Click it to give up the quick start wizard.
Description
Enter the description of the specific network service.
Type in the valid user name (maximum 63 characters)
provided by the ISP in this field.
Type a valid password provided by the ISP.
Retype the password.
Vigor160 Series User's Guide