Draytek Vigor 160 Series User Manual page 362

wan detect <wan1> ttl <1-255>
wan detect <wan1> target2 <ip addr>
wan detect <wan1> target_gw <1/0>
wan detect <wan1> interval <interval>
wan detect <wan1> retry <retry>
wan detect status
S y n t a x
S y n t a x
Parameter
on
off
always_on
-t <time>
-i <Interval>
target <ip addr>
target2 <ip addr>
target_gw <1/0>
ttl <1-255>
interval<Interval>
retry <retry>
status
E x a m p l
E x a m p
> DrayTek> wan detect status
WAN1: off, send time=30, Interval = 5
WAN2: off, send time=30, Interval = 5
WAN3: off, send time=30, Interval = 5
WAN4: off, send time=30, Interval = 5
WAN5: off, send time=30, Interval = 5
WAN6: off, send time=30, Interval = 5>
T e l n e t C o m m
T e l n e t C o m m
This command allows you to configure multi-VLAN for WAN and LAN. It supports pure bridge
mode (modem mode) between Ethernet WAN and LAN port 2~4.
S y n t a x
S y n t a x
wan mvlan [pvc_no/status/save/enable/disable] [on/off/clear/tag tag_no] [service
type/vlan priority] [px ... ]
352
D e s c r i p t i o n
D e s c r i p t i o n
Description
Enable ping detection. The IP address of the target shall be set.
Enable ARP detection (default).
Disable link detect, always connected(only support static IP)
Set the time setting. The default value is "30" and the range shall
be 1 to 255.
Type the interval for the system to execute the PING operation. The
default value is "5" and it shall be smaller than time setting.
Set the IP address for ping target.
Set the secondary ping target.
Set whether to use gateway as ping target. (1: yes 0: no)
Note that USB WAN (PPP mode) cannot support PING gateway
It means to set the ping TTL value (work as trace route)
If you do not set any value for ttl here or just type 0 here, the
system will use default setting (255) as the ttl value.
Set the interval between each ping operation. Available setting is
between 1 and 3600. The unit is second.
interval: Type a value.
Set how many ping operations are retried before the Router judges
that the WAN connection is disconnected. Available setting is
between 1 and 255. The unit is times.
retry : Type a number.
It means to show the current status.
e
l e
a n d : w a n m v l a n
a n d : w a n m v l a n
Vigo160 Series User's Guide