Communicating Thermostats
AQ thermostats were designed exclusively for use with the AQ2000 Controls. They are the only thermostats you
need for enhanced communication capabilities with multiple zones.
Note: Non-communicating thermostats can be used for single-zone systems when using an AQ2511B0 Control Panel. Communicating AQ1000
thermostats are required for multi-zone systems.
Note: AQ1000TP2 has 4 programs/day capability with previous AQ Panels, but certain features require panels with V2 software and beyond.
These features include A/C compatibility, communication of Day/Time of Day, an Auto-Daylight savings time reset.
AQ1000Tn2 – non-Programmable Thermostat
• 2 unique programs per day – Setpoint (WAKE and RETURN) and setback
(LEAVE and SLEEP)
• Real Time Indoor and Outdoor temperatures are shown on display (with
programmable panels model only)
• Easy 2-wire "polarity insensitive" installation for quick and easy wiring for both
retrofit and new construction jobs
• Setpoint and setback for all zones can be programmed at either the thermostat
or the main AQ2000 control panel to save time
• Can program thermostats with min/max setpoints AND lock out zone
thermostats from the central control panel
• Can connect a floor sensor to any AQ1000 thermostat and control room and
floor temperature
• Can display temperature as Fahrenheit or Celsius
• Easy-to-read backlit display
• Settings memory retained in the event of power loss
• Separate installer setup and homeowner menus
AQ1000TP2 – Programmable Thermostat
All The Great Features Of The AQ1000TN2 Thermostat, Plus:
• Programmable with 4 unique programs per day that can be set for all
programmable TP2 thermostats from one TP2 thermostat, if desired.
• Can be used for heating and cooling
• Controls 1 zone of cooling (64 zones of heating can be used on the same
network when using AQ1000TN2 thermostats)
• Date and time displayed on thermostat and can be set at either the thermostat
or the control panel.
• Automatic DST switch over of entire system – controlled by AQTP2 thermostat
– non-Programmable and Programmable
Backwards Compatible
New AQ1000TP2 cover plate fits existing AQ1000TN2
back-plate, so upgrades* are easy!
9