Honeywell AQ25A Series Technical Reference Booklet page 143

Menu Option
A/C EQUIP CONFIG Central A/C – Available only if no AQ158 controller is present on the network.
ZONE A-1 to D-16
A/C UNIT NONE / 1
COOLING ENABLE / DISABLE
STATISTICS Displays the summary and Zone relay activity (hours of operation or cycles since last reset)
LAST DATA Max. 24,855 days (68 years)
RESET
RESET ALL DATA YES / NO
ARE YOU SURE?
BOILER FIRE Maximum of 596,523 hours
ACTIV (68 years)
BOILER PUMP Maximum of 596,523 hours
ACTIV (68 years)
DHW PUMP Maximum of 596,523 hours
ACTIV (68 years)
AUX PUMP Maximum of 596,523 hours
ACTIV (68 years)
SEC PUMP Maximum of 596,523 hours
ACTIV (68 years)
INJ PUMP Maximum of 596,523 hours
ACTIV (68 years)
AUX OUT Maximum of 596,523 hours
ACTIV (68 years)
MIX VLV. OPEN Maximum of 10,000,000
CYCLE cycles
MIX VLV. CLOSE Maximum of 10,000,000
CYCLE cycles
ZONE A-1 Maximum of 596,523 hours
ACTIV (68 years)
ENVIRACOM Not used - reserved for future use.
Modules ID:
Table 6. Installer Menu – Equipment Setup. (Continued)
EQUIPMENT SETUP
Factory
Range Default
A-1
1
ENABLE
2000 JAN 01 Date of last reset formatted as YYYY MMM DD.
NO
0H
0H
0H
0H
0H
0H
0H
0
0
0H
n/a n/a
37
AQ252 Universal Injection/Mixing Boiler Reset Control Panels
Description
Selects the desired zone.
Defines which A/C compressor is associated with each
zone thermostat.
NOTE: At this time, only one zone of A/C can be handled
by the AQ2000 controls. The options are 1 (if the
zone uses an AQ1000TP2 programmable
thermostat and can call for cooling), or NONE.
Enables or disables the cooling functions of the zone's
programmable thermostat (AQ1000TP2).
NOTE: This item is always set to DISABLE when a non-
programmable thermostat (AQ1000TN2) is used
in the selected zone.
Selecting YES resets all of the summary and zone activity
values to zero.
Hours of operation of the relay since last reset.
Hours of operation of the relay since last reset.
Hours of operation of the relay since last reset.
Hours of operation of the relay since last reset.
Hours of operation of the relay since last reset.
Hours of operation of the relay since last reset.
Hours of operation of the relay since last reset.
Displays number of valve open cycles since last reset.
Displays number of valve close cycles since last reset.
Hours of operation of the zone's relay (e.g., zone A-1)
since last reset.
The zone Identifier is A-1 through D-16.
n/a
69-1986—02