Cable The Line Ports; Cabling Diagrams - Cisco SCE 2000 4/8xFE Quick Start Manual

6

Cable the Line Ports

This section provides instructions for cabling the Fast Ethernet ports for both one and two SCE 2000 topologies, and for
configuring Fast Ethernet (FE) interface parameters. In a topology utilizing two SCE 2000s (cascade), this includes the
cascade ports as well as the line ports.
Class 1 laser. Avoid exposure to radiation and do not stare into open aperture.
Warning
When installing a cascaded system, it is extremely important to follow the sequence of procedures outlined in the section
Note
Installing a Cascaded System

Cabling Diagrams

Before beginning, find the appropriate cabling diagram for the topology in your installation:
• Single SCE 2000 topologies
• Single Link: Inline Topology
Single Link: Receive-only Topology
•
Dual Link: Single
•
Dual SCE 2000 topologies (cascaded)
•
Dual Link: Two
•
Note When installing a cascaded system, it is extremely important to follow the sequence of procedures outlined in the section
Installing a Cascaded System.
(on page 50).
(on page 40)
(on page 40)
SCE 2000 Topologies
SCE 2000s Topology (on page 42)
(on page 41)
39