Viewing Configuration - Cisco SCE 2000 4/8xFE Quick Start Manual

Viewing the User Log Counters
View the user log for errors that occurred during the installation process.
To display the user log device counters, complete the following steps:
At the SCE 2000# prompt, type show logger device User-File-Log counters and press Enter.
E :
XAMPLE
The following example shows the current User-File-Log device counters.
SCE 2000#show logger device user-file-log counters
Logger device User-File-Log counters:
Total info messages: 1
Total warning messages: 0
Total error messages: 0
Total fatal messages: 0
If there are "Total error messages" or "Total fatal messages", use the show logger device User-File-Log
command to display details about the errors.

Viewing Configuration

When you enter configuration commands, it immediately effects the SCE platform operation and configuration. This
configuration, referred to as the running-config, is saved in the SCE platform volatile memory and is effective while
the SCE platform is up. After reboot, the SCE platform loads the startup-config, which includes the non-default
configuration as saved by the user, into the running-config.
The SCE platform provides commands for:
Viewing the running configuration
•
• Viewing the startup configuration
After configuring the SCE platform, you may query for the running configuration using the command show running-
config. This command displays the non-default running configuration. To view all SCE platform running configuration,
whether it is the default or not, you may use the option all-data in the show running-config command.
To view the running configuration, use the following command:
At the SCE 2000# prompt, type show running-config.
The system shows the running configuration.
46