Table of Contents
Advertisement
Would you like to add another SNMP SET community? [no]:y
Enter up to 20 SNMP SET communities as described in step 6 and step 7.
When all entries have been added, press Enter
•
Would you like to add another SNMP SET community? [no]:
Enter the SNMP trap managers menu.
Step 9
Would you like to configure SNMP trap managers? [no]: y
Type y and press Enter.
The SNMP trap managers dialog begins.
If you choose not to configure SNMP trap managers, the dialog skips to the authentication failure trap status. (See step 14.)
Step 10
Type the trap manager IP address and press Enter.
Enter SNMP trap manager IP address:
Note that there is no default for this parameter.
Type the trap manager community string and press Enter.
Step 11
Note that there is no default for this parameter.
Enter SNMP trap manager community string:
Step 12
Type the number of the trap manager SNMP version (1 or 2c) and press Enter
Note that there is no default for this parameter.
Enter trap manager SNMP version:
Step 13
The maximum number of trap managers is 20.
To add more entries, type y and press Enter
•
Would you like to add another SNMP trap manager? [no]:y
Enter up to 20 trap managers as described in step 10 through step 12.
When all entries have been added, press Enter
•
Would you like to add another SNMP trap manager? [no]:
Step 14
Configure the Authentication Failure trap status.
To disable the Authentication Failure trap, press Enter.
•
To enable the Authentication Failure trap, type y and press Enter.
•
Enable the 'Authentication Failure' trap [no]:
Configure the SCE enterprise trap status.
Step 15
•
To disable the SCE enterprise traps, type n press Enter.
To enable the SCE enterprise traps, type y and press Enter.
•
Enable the SCE enterprise traps []:
Step 16
Type the name of the system administrator and press Enter.
Note that there is no default for this parameter.
Enter system administrator contact name []:
30
Advertisement
Table of Contents
