Quick Reference Cards; Xcruze 110 Ap Quick Reference - Honeywell BENDIXKing xCruze 110 Operating Handbook

7. Quick Reference Cards

The following Quick Reference Card will give a quick overview of
the XCruze 110 AP controls.
7.1.
Power Up – After engine start!!! (stationary aircraft not
required)
GPS Status
Red DG – No GPS signal
Yellow DG – No position fix
White DG – GPS is OK
Gray DG – GPS signal is varying or has a large error from last
Blue DG – Flight plan or GPSS information is being received
Engage Autopilot
Press knob
or
Push and hold CWS switch for 2 seconds and release
or
Press AP LVL button
Disengage Autopilot
Press and hold knob for 2 seconds
or
Press CWS switch
Lateral Modes
Track Mode
Rotate knob to select desired track
GPS Steering Mode (GPSS)
Toggle joystick to left one time.
8300-089

XCruze 110 AP Quick Reference

51 Rev 3