Slip/Skid Indicator Centering; Airspeed Indicator V-Speed Values - Honeywell BENDIXKing xCruze 110 Operating Handbook

5.1.3. Slip/Skid Indicator Centering

The slip/skid indicator can be centered manually. First, verify
that the aircraft is level from side to side before centering the ball.
When CENTER BALL is shown on the display, rotate the knob either
clockwise or counter-clockwise to center the indicator behind the
red pointer. Figure 5.1.3a shows the CENTER BALL setup screen.
Toggle the joystick to the right to advance to the next screen, VS0.

5.1.4. Airspeed Indicator V-speed Values

The Vspeed values of the airspeed indicator tape are user
selectable. The left side of the lower box will display which airspeed
color is currently being set. The right side of the lower box displays
the currently set value. Rotate the knob to adjust the value as
desired. Toggle the joystick to the right to advance to the next setup
screen. Repeat for each airspeed color setup screen. Repeat this
process for each of the Vspeed setup screens.
The PFD display allows selection of VS0, VS, VFE, VN0, and VNE.
Figure 5.1.4a shows what is displayed for the VS0 setup screen.
Figure 5.1.4b shows the VNE setup screen.
8300-089
Figure 5.1.3a
16 Rev 3