Low Airspeed Warning - Honeywell BENDIXKing xCruze 110 Operating Handbook

Figure 5.1.4a
Figure 5.1.4b

5.1.5. Low Airspeed Warning

The PFD display contains a low airspeed warning for use when
the autopilot is either engaged or not. This warning flashes the
center dot of the horizon reference bar red when the user set
airspeed is reached. It will continue flashing until the airspeed
reaches 50% of the set value, so as not to give a flashing warning on
landing rollout and taxi. When LOW AS WRN is showing on the
display, rotate the knob to adjust the set point to the desired value.
Figure 5.1.5a shows the LOW AS WRN setup screen. When the
desired value is set, toggle the knob to the right to advance to the
next setup screen.
8300-089 17 Rev 3