Gpss Mode - Honeywell BENDIXKing xCruze 110 Operating Handbook

6.3.3. GPSS Mode

The GPSS mode allows the autopilot to follow a direct-to or
multi-leg flight plan from an IFR GPS or an external steering source
such as an EFIS. This mode uses ARINC 429 data. This mode will
anticipate upcoming turns, rounding the corners instead of
overshooting the next course. It will also fly procedure turns and
approaches. This mode is accessed from the track selector mode by
toggling the joystick to the left. When in GPSS Mode, the autopilot
display will show GPSS on the display. If ARINC 429 steering inputs
are present, GPS Nav mode will be skipped.
To access the GPSS mode from track select mode, toggle the
joystick to the left. Figure 6.3.3a shows the transition from track
select mode to GPSS mode.
8300-089
Toggle joystick to the left
Figure 6.3.3a
35 Rev 3