Table of Contents
Advertisement
6.2.
6.2.1. Engaging the autopilot
The autopilot can be engaged in one of four ways:
1) Press the knob on the autopilot face;
2) Press and hold the CWS button for 1.5 seconds (if equipped) (See
section 6.5.3 for Control Wheel Steering Mode).
3) Remotely from an EFIS or other system, which has a connection
to the autopilot (if equipped).
4) Using the AP Level button (if equipped). (See section 6.5.1 for
Emergency Level Mode).
When engaged using the knob or CWS button, the autopilot will
synchronize to the current ground track and the current vertical
speed, as shown in Figure 6.2.1a. The aircraft is flying a track of 073
degrees and a positive vertical speed of 600 fpm.
8300-089
Engaging/Disengaging the autopilot
Figure 6.2.1a
31
Rev 3
Advertisement
Table of Contents
