Pitch Servo Reversal; Static Lag - Honeywell BENDIXKing xCruze 110 Operating Handbook

aircraft to maintain this airspeed. The MAX AIRSPD setup screen is
shown in Figure 5.3.3a

5.3.4. Pitch Servo Reversal

Selectable between 0 and 1. This setting allows reversal of the
direction of travel and trim annunciation of the pitch servo without a
wiring change. The PITCH REV setup screen is shown in Figure
5.3.4a.

5.3.5. Static Lag

Selectable from 0 to 4. This setting is used to tune out gentle
oscillations in the pitch axis. Increasing the setting will dampen an
oscillation, but will also make the autopilot less reactive to altitude
deviations. The STATIC LAG setup screen is shown in Figure 5.3.5a.
8300-089
Figure 5.3.3a.
Figure 5.2.4a
25 Rev 3