Dg Drift Adjustment - Honeywell BENDIXKing xCruze 110 Operating Handbook

addressed in section 5.1.2. Figure 5.1.1a shows the SET DG setup
screen.

5.1.2. DG Drift Adjustment

When the DG is manually set to a compass heading, it may drift
off the set heading, just like all other unslaved gyros. The drift
adjustment allows for removal of the DG drift rate. Rotate the knob
clockwise or counter-clockwise to correspond with the desired drift
removal. The values are arbitrary and do not correspond to a certain
degrees per second value.
adjustment screen.
Once the DG drift has been removed to satisfaction, toggle the
joystick to the right to advance to the next setup screen or click the
knob in to exit the setup menus.
8300-089
Figure 5.1.1a
Figure 5.1.2a shows the DG DRIFT
Figure 5.1.2a
15 Rev 3