Autopilot Display; Trim Annunciation - Honeywell BENDIXKing xCruze 110 Operating Handbook

Table of Contents

Advertisement

4.2.
The autopilot mode and selection display is in the black bar
under the DG box. Lateral modes and selections are displayed on the
left half of the autopilot display bar, vertical modes are displayed on
the right half of the autopilot display bar.

4.2.1. Trim Annunciation

The autopilot pitch servo can detect when the aircraft is out of
trim with the autopilot engaged. Feedback is shown on the display,
above the autopilot display bar and to the left of the DG box. It will
flash yellow with an arrow pointing either up or down when an out
of trim condition is detected. An arrow pointing up means trim NOSE
UP, an arrow pointing down means trim NOSE DOWN. Figure 4.2.1a
shows the trim NOSE DOWN annunciation on the display.
8300-089
Figure 4.1.2e

Autopilot Display

Figure 4.2.1a
12
Rev 3

Advertisement

Table of Contents
loading

Table of Contents