Altimeter Units; Airspeed Units - Honeywell BENDIXKing xCruze 110 Operating Handbook

5.1.6. Altimeter Units

The PFD display allows the units of the altimeter to be changed
between FEET or METERS. When ALT UNITS is shown on the
display, the upper right side box on the display will show the
currently selected altimeter units. From this screen, rotate the knob
clockwise to select M, rotate counter-clockwise to select FT.
Figure 5.1.6a shows the ALT UNITS setup screen. Once the desired
unit is set, toggle the joystick right to advance to the next setup
screen.

5.1.7. Airspeed Units

The PFD display allows the units of the airspeed indicator to be
changed between KNOTS, KPH, or MPH. When AS UNITS is shown on
the display, the upper left side box on the display will show the
currently selected airspeed units. From this screen, rotating the
8300-089
Figure 5.1.5a
Figure 5.1.6a
18 Rev 3