Baro Units - Honeywell BENDIXKing xCruze 110 Operating Handbook

knob clockwise will step from KTS-> KPH->MPH, respectively.
Rotating the knob counter-clockwise will step from MPH->KPH-
>KTS, respectively. Figure 5.1.7a shows the AS UNITS setup screen.
Once the desired unit is set, toggle the joystick right to advance to the
next setup screen.

5.1.8. Baro Units

The PFD display allows the units of the barometer to be changed
between IN HG, HPA, or MBAR. When BARO UNITS is shown on the
display, the lower right side box on the display will show the
currently selected barometer units. From this screen, rotating the
knob clockwise will step from INHG->HPA->MBAR, respectively.
Rotating the knob counter-clockwise will step from MBAR->HPA-
>INHG, respectively.
Figure 5.1.8a shows the BARO UNITS setup screen. Once the
desired unit is set, click the knob in to exit the setup screen.
8300-089
Figure 5.1.7a
19 Rev 3