Creating An Arpeggio - Yamaha MO6 Owner's Manual

TIP Editing a Mixing by using Control sliders (in the Song mode/Pattern mode)
[SONG] Song selection [MIXING]
In the Song/Pattern mode, the four Control sliders let you independently adjust the levels of the Parts (Voices), letting
you control the overall balance of the Parts.
n
Inadvertent use of the sliders may result in no sound. If this occurs, move the sliders upward.

Creating an Arpeggio

TIP
In addition using the preset Arpeggios, you can also create your own original Arpeggio data.
Actually, there is no direct operation for recording Arpeggios. First, you have to record a Phrase to a Song or Pattern
track. Then, use the appropriate Song or Pattern Job function to convert the data to Arpeggio data.
1
Record the MIDI sequence data to be used
as the basis for base of the Arpeggio to a
Song or Pattern.
Song or Pattern
Recording
Track 1
Track 2
Track 3
Recording
Track 4
Track 5
Track 6
Track 7
Recording
Track 8
Track 9
Track 10
Track 11
Recording
Track 12
Track 13
Track 14
Track 15
Track 16
You can record MIDI sequence data for
the Arpeggio to any of the tracks. After
recording, select four tracks from all
sixteen and convert them to Arpeggio
data.
Determining how Song/Pattern data is converted to an Arpeggio—Convert Type
MIDI sequence data (of Song/Pattern tracks) can be converted to Arpeggio data in one of three ways, according to
the Convert types below. These types can also be selected independently for each destination track—providing
enormous flexibility and performance control.
Normal The Arpeggio is played back using only the played note and its octave notes.
Fixed Playing any note(s) will trigger the same MIDI sequence data.
OrgNotes (Original Notes) Basically same as "Fixed" with the exception that the Arpeggio playback notes differ according to the played chord.
[EDIT] Part selection [F2] OUTPUT
2
Convert the MIDI sequence data (recorded to the Song or Pattern) as
Arpeggio data.
Convert
[SONG] [JOB]
After setting the parameters as shown below,
press the [ENTER] button to execute Convert.
Specify the destination Arpeggio number.
Specify the tracks of the source
Song or Pattern. Set unused
tracks to "off."
[SF1] VOL/PAN Volume
Arpeggio
User Arpeggio 256
User Arpeggio 001
Track 1
Track 2
Track 3
Track 4
[F5] TRACK 07: Put Track To Arp
Specify the source
Song/Pattern number
and measure range.
Select a convert type by track
(see below).
Set the root note when the
convert type of any track is
set to "OrgNote."
Creating a Song
Owner's Manual 97