Yamaha MO6 Owner's Manual page 56

Editing a Voice
Editing a Voice by using the Knobs
TIP
The four knobs at the top left of the instrument are not only for tweaking the sound while you perform—you can also
use them to edit a Voice, either in the Voice Play mode or the Voice Edit mode.
When the [PAN/SEND] indicator is turned on:
PAN Determines the stereo pan position of the Voice.
REVERB Determines the amount of Reverb effect that is applied to the Voice.
CHORUS Determines the amount of Chorus effect that is applied to the Voice.
TEMPO Determines the tempo of the Arpeggio assigned to the currently selected Voice.
When the [TONE] indicator is turned on:
CUTOFF Raises or lowers the Filter cutoff frequency to adjust the tone brilliance.
RESONANCE Boosts or attenuates the level at the area around the Filter cutoff
frequency.
ATTACK Determines the attack time of the sound. For example, you can adjust a
strings Voice so that the sound gradually swells in volume by setting a
slow attack time – simply turn this knob to the right.
RELEASE Determines the release time of the sound. Turning the knob to the right
sets a long release time and (depending on the selected Voice) lets the
sound sustain after the key is released. To produce a sharp release, in
which the sound abruptly cuts off, set a short release time.
n
The settings above are applied as offsets to the AEG and FEG settings in the Voice Edit mode.
When the [ARP FX] indicator is turned on:
SWING Adjusts the swing feel of the Arpeggio playback.
GATE TIME Adjusts the Gate Time (length) of the Arpeggio notes.
VELOCITY Adjusts the velocity of the Arpeggio notes.
UNITMULTIPLY Adjusts the Arpeggio playback time based on tempo.
When the [EQ] indicator is turned on:
LO Determines the amount of boost or attenuation applied to the low
frequency band of the Master EQ.
LO MID Determines the amount of boost or attenuation applied to the low-
midrange frequency band of the Master EQ.
HI MID Determines the amount of boost or attenuation applied to the high-
midrange frequency band of the Master EQ.
HI Determines the amount of boost or attenuation applied to the high
frequency band of the Master EQ.
n
The settings above are applied as offsets to the EQ settings in the [VOICE]
When both the [PAN/SEND] and [TONE] indicators are turned on (by pressing them simultaneously):
ASSIGN A Adjusts parameters assigned to these knobs in the [UTILITY]
ASSIGN B
ASSIGN 1 Adjusts parameters assigned to these knobs in the [VOICE]
ASSIGN 2
n
In addition to above functions, Master Effect related parameters (set in the [UTILITY]
these four knobs by pressing the [ARP FX] and [EQ] buttons simultaneously. The particular parameters assigned to the four knobs can be set
in the [UTILITY]
TIP Editing a Voice by using the Control sliders
[VOICE] Voice selection
In the Voice mode, the four Control sliders let you independently adjust the levels of the Elements of a Normal Voice or
the Drum Voice keys. When a Normal Voice is selected, you can adjust the level balance among the four Elements.
n
Inadvertent use of the sliders may result in no sound. If this occurs, move the sliders upward.
56 Owner's Manual
[F4] CTL ASN [SF5] MEF display.
[EDIT] Element selection
[VOICE] Voice selection
[F2] OUTPUT Pan
[VOICE] Voice selection
[F2] OUTPUT RevSend
[VOICE] Voice selection
[F2] OUTPUT ChoSend
[VOICE] Voice selection
[VOICE] Voice selection
[VOICE] Voice selection
[VOICE] Voice selection
[VOICE] Voice selection
[VOICE] Voice selection
[F3] ARP [SF3] PLAY FX
[VOICE] Voice selection
[F3] ARP [SF3] PLAY FX
[VOICE] Voice selection
[F3] ARP [SF3] PLAY FX
[VOICE] Voice selection
[F3] ARP [SF3] PLAY FX
[VOICE] Voice selection
[F1] GENERAL [SF3] MEQ OFS
[VOICE] Voice selection
[F1] GENERAL [SF3] MEQ OFS
[VOICE] Voice selection
[F1] GENERAL [SF3] MEQ OFS
[VOICE] Voice selection
[F1] GENERAL [SF3] MEQ OFS
[UTILITY] [F3] VOICE
[F4] CTL ASN [SF2] ASSIGN display.
Voice selection [EDIT] [COMMON]
[F3] VOICE
[F4] AMP [SF1] LVL/PAN
[EDIT] [COMMON] Page 154
[EDIT] [COMMON] Page 154
[EDIT] [COMMON] Page 154
[F6] ARP Tempo Page 154
[F5] EG CUTOF Page 152
[F5] EG RESO Page 152
[F5] EG ATK (AEG) Page 152
[F5] EG REL (AEG) Page 152
[EDIT] [COMMON] Page 155
Swing
[EDIT] [COMMON] Page 155
GateTimeRate
[EDIT] [COMMON] Page 155
VelocityRate
[EDIT] [COMMON] Page 155
UnitMultiply
[EDIT] [COMMON] Page 153
LOW
[EDIT] [COMMON] Page 153
LOW MID
[EDIT] [COMMON] Page 153
HIGH MID
[EDIT] [COMMON] Page 153
HIGH
[SF1] MEQ display.
Page 71
[F4] CTL SET display. Page 70
[SF2] MEF display) can be assigned to
Level