Creating A Performance - Yamaha MO6 Owner's Manual

Performance Play mode
Creating a Performance by combining Voices
Performances can be made up of a maximum of four Parts, each of which can be assigned a different Voice. In this section,
we'll create a Performance by combining two Voices.
Preparing to create a Performance
(Initializing the Performance)
Select the desired Performance in the
1
Performance Play mode.
Press the [JOB] button, and then the [F1]
2
button.
The Initialize display is shown. Check the "ALL" check box
to initialize all data of the Performance. For details about
the Initialize function, refer to page 168.
EDIT
COMPARE
Press the [ENTER] button. (The display
3
prompts you for confirmation.)
Press the [INC/YES] button to initialize the Performance.
n
Keep in mind that when you execute the Store operation by
pressing the [STORE] button here, the Performance at the
destination will be replaced with the Initialized Performance above.
n
For details about the Store operation, refer to page 66.
4
Press the [PERFORM] button.
The current Performance name will change to "Init Perf" in
the display.
n
When you initialize a Performance, the Voice at Preset Bank 1,
Voice number 1 is assigned to Part 1 as the default.
46 Owner's Manual
JOB STORE
Playing several Voices together (Layer)
5
Press the [F2] VOICE button.
This calls up a list indicating which Voice is assigned to
each Part of the current Performance.
Since the current Performance has been initialized, the
only Voice in the Performance is "PRE1: Full Grand," set to
Part 1.
SCENE
SF1 SF2
F1 F2 F3
6
Assign the desired Voice to Part 2.
6-1
Move the cursor to the Voice Bank or Voice
Number of Part 2.
Voice Bank
Voice Number
6-2
Press the [SF1] ADD INT button. This enables
assignment of the selected internal Voice to Part
2.
6-3
Select the Voice you've assigned to Part 2 as you
did in steps 2 – 4 in the section "Selecting a
Normal Voice" or "Selecting a Drum Voice" (page
40 or 41).
You can select the desired Bank and Number directly by
using the [DEC/NO], [INC/YES] buttons and data dial. You
can also use the Category Search function (page 42).
Here, we'll assign a flute Voice (PRE2: SweetFlute) to Part 2.
SF3 SF4 SF5 INFORMATION
F4 F5 F6