Yamaha MO6 Owner's Manual page 144

Internal Structure (System Overview)
In the Song/Pattern mode
The Effect parameters in the Song/Pattern mode are set for each Song/Pattern.
[SONG]/[PATTERN] Song/Pattern selection
[EDIT] [COMMON] [F6] EFFECT
Tone Generator
block
Part 1
Part EQ *2
144 Owner's Manual
[MIXING]
[SF1] CONNECT
Part 1 Insertion
Effect
*1
(VCE INS)
A
B
System effects (Reverb effect and Chorus effect)
Chorus Ctg, Chorus Typ (Chorus Effect Category, Chorus Effect Type)
Reverb Typ (Reverb Effect Type)
Determines the effect type for Chorus.
Chorus Send, Reverb Send
Determines the level of the sound (from Insertion A or B, or the bypassed signal) that is
sent to Chorus/Reverb effect. These Parameters can be set in the Song/Pattern Mixing
mode (*3)
Settings: Settings: 0 – 127
Chorus Return, Reverb Return
Chorus Pan, Reverb Pan
Determines the Return level and pan position setting for the Chorus/Reverb effect.
Settings: 0 – 127, L63 (far left) – C (center) – R63 (far right)
Chorus to Reverb
Determines the Send level of the signal sent from the Chorus Effect to the Reverb
Effect.
Settings: 0 ~ 127
*3
Reverb Send Reverb Return
Chorus Send Chorus Return
Master effect
[SONG]/[PATTERN]
[MIXING] [EDIT]
MEF [SF2] MEF
*1 Select the part to which the Insertion effect is applied. The Insertion
effect depends on the setting of the Voice assigned to the selected
part.
[SONG]/[PATTERN]
[COMMON]
*2 [SONG]/[PATTERN]
[EDIT] Part selection
*3 [SONG]/[PATTERN]
[F4] EF SEND
*4 [SONG]/[PATTERN]
[EDIT] [COMMON]
[SONG]/[PATTERN]
[EDIT] [COMMON]
4*
Master EQ
Song/Pattern selection
[COMMON] [F2] MEQ/
Song/Pattern selection [MIXING]
[F6] EFFECT [SF2] INS SW
Song/Pattern selection [MIXING]
[F3] EQ
Song/Pattern selection [MIXING]
Song/Pattern selection [MIXING]
[F2] MEQ/MEF [SF2] MEQ
Song/Pattern selection [MIXING]
[F1] GENERAL [SF3] MEQ OFS
Output
[EDIT]