Remote Control Assignments - Yamaha MO6 Owner's Manual

Checking the Remote Control assignments
If you're unsure as to which software function has
been assigned to a particular panel control on the
MO, this convenient feature lets you quickly check it
from the display.
1
In the Remote Control mode, press the
[INFORMATION] button to call up the
information display, indicating the function of
the last pressed button.
2
Press the button for which you want to check
the assignment.
This display shown above appears when you
press the [F] (Play) button. In this way, you
can check each button's control assignment
simply by pressing it.
3
Press the [INFORMATION] button again to
return to the Remote Control mode.
n
While the Information display is shown, the panel buttons
cannot be used to control the computer software.
Demo display in Remote Control function
If the connection settings are not appropriate, the
demo display (below) will be shown. If this happens,
check the MO settings and DAW settings as
described on page 113.
Using the MO with computer software

Remote Control Assignments

SF1 SF2 SF3
F1 F2 F3
SF1 SF2
F1 F2 F3
When controlling Multi Part Editor/SQ01 V2
Functions of 01X assigned to [F1] – [F6] and [SF1] – [SF5]
buttons
PAGE1
SEND GROUP
PAN/SEND
PAN DYNAMICS
FADER BANKS
TONE
FLIP
SOLO REC/RDY
MIXER/LAYER
ARP FX
INST AUX/BUS
AUDIO MIDI
PAGE2
EQ LOW EQ HIGH-MID
EQ
SEL CH EQ LOW-MID
PAN/SEND
F5
F1 F2
TONE
TONE
ARP FX
ARP FX
CURSOR-L CURSOR-R
CURSOR-DWN CURSOR-UP
EQ
Button/Controller names
on 01X
In all modes:
[DISPLAY UP] Changes the parameter to be edited.
[DISPLAY DOWN]
[NAME/VALUE] Changes the indication of the parameter name and its value.
[SHIFT]+[NAME/VALUE] Changes the meter display mode.
[ON] (in the normal status) Turns each channel off or on (mutes/unmutes the signal).
[SHIFT] + [ON] of the Master Turns all the channels including the Master Channel off or on
Channel (in the normal (mutes/unmutes the signal).
status)
[SHIFT] + [ON] of each Turns all the channels with the exception of the Master
channel (in the normal status) Channel off or on (mutes/unmutes the signal).
[ON] (with the [SOLO] lamp Turns the Solo function of each channel on or off (applies to
turned on) the Channel Module/Software Synthesizer Module)
[SHIFT] + [ON] (with the Turns the Solo function of each channel on or off (applies to
[SOLO] lamp turned on) the Channel Module/Software Synthesizer Module)
[SOLO] Changes the function of the [ON] button to the Solo function.
[SHIFT]+[SOLO] Determines the Solo/Mute settings of the selected tracks in
the Track View window.
[SHIFT]+[REC RDY] Turns track recording on or off.
[AUDIO] Starts the Audio Mixer or moves the Audio Mixer Window to
the front of the computer screen. This button operation
applies to the Channel Module software.
[INST] Starts the Audio Mixer or moves the Audio Mixer Window to
the front of the computer screen. This button operation
applies to the Software Synthesizer Module.
[MIDI] Starts the MIDI Editor (such as the Multi Part Editor) or moves
it to the front of the computer screen.
SF4 SF5 INFORMATION
F4 F5 F6
SF3 SF4 SF5
F4 F5 F6
NAME/VALUE DIAL RESET KN1-4/5-8
EFFECT BANK-L BANK-R SHIFT
NAME/VALUE DIAL RESET KN1-4/5-8
BANK-L BANK-R SHIFT
NAME/VALUE DIAL RESET KN1-4/5-8
OTHER BANK-L BANK-R SHIFT
NAME/VALUE DIAL RESET KN1-4/5-8
EQ HIGH BANK-L BANK-R SHIFT
F6 F7 F8 KN1-4/5-8
F3 F4 SHIFT
NAME/VALUE DIAL RESET KN1-4/5-8
BANK-L BANK-R SHIFT
SCRUB DIAL RESET KN1-4/5-8
ZOOM BANK-L BANK-R SHIFT
Functions
Owner's Manual 117