Yamaha MO6 Owner's Manual page 164

Voice Edit mode Element Edit
[F6] EQ (Equalizer)
Type
When set to EQ L/H
Low Freq
Settings: 50.1Hz – 2.00kHz
Gain
+
0
–
Low Gain
Settings: -32 – 0 – +32
Owner's Manual
164
Determines the Equalizer Type. This synthesizer features a wide selection of various equalizer types, which can
be used not only to enhance the original sound, but even completely change the character of the sound. The
particular parameters and settings available depend on the specific Equalizer Type that is selected.
Settings: EQ L/H, P.EQ, boost6, boost12, boost18, thru
EQ L/H (Low/High).................This is a "shelving" equalizer, which combines separate high and low frequency bands.
P.EQ (Parametric EQ) ............The Parametric EQ is used to attenuate or boost signal levels (gain) around the Frequency. This
boost6 (boost 6dB)/boost12 (boost 12dB)/boost18 (boost 18dB)
thru.........................................If you select this, the equalizers are bypassed and the entire signal is unaffected.
High Freq
Setttings: 503.8Hz – 10.1kHz
Frequency
High Gain
Settings: -32 – 0 – +32
type features 32 different "Q" settings, which determine the frequency band width of the equalizer.
These can be used to boost the level of the entire signal by 6dB, 12dB and 18dB, respectively.
When set to P.EQ
Q (Frequency characteristic)
+
Settings: 0 – 31
0
Gain
–
Settings: -32 – 0 – +32
Freq
Settings: 139.7Hz – 12.9kHz
Frequency